READ=OFF, ENABLE=OFF, NUMCYCLE=CNT_2, LOCNTMANRUN=NORUN, LOCNTMANCLEAR=NOCLEAR, LOCNTOVERRIDEEN=DISABLE, CLEAR=OFF, FCALRUNCLKEN=DISABLE, RUN=OFF
No Description
| ENABLE | Enable LO Counter 0 (OFF): LO counter is disabled 1 (ON): LO counter is enabled |
| CLEAR | Clear LO Counter 0 (OFF): Do not clear LO counter 1 (ON): Clear LO counter |
| RUN | Run LO Counter 0 (OFF): Do not run LO counter 1 (ON): Run LO counter |
| READ | Read LO Counter 0 (OFF): LOCOUNT register read returns all 0’s 1 (ON): LOCOUNT register read returns count value |
| NUMCYCLE | Number of Clock Cycles to Run LO Counter 0 (CNT_2): Set count length to 2 XO clock cycles 1 (CNT_4): Set count length to 4 XO clock cycles 2 (CNT_8): Set count length to 8 XO clock cycles 3 (CNT_16): Set count length to 16 XO clock cycles 4 (CNT_32): Set count length to 32 XO clock cycles 5 (CNT_64): Set count length to 64 XO clock cycles 6 (CNT_128): Set count length to 128 XO clock cycles 7 (CNT_256): Set count length to 256 XO clock cycles 8 (CNT_512): Set count length to 512 XO clock cycles 9 (CNT_1024): Set count length to 1024 XO clock cycles 10 (CNT_2048): Set count length to 2048 XO clock cycles 11 (CNT_4096): Set count length to 4096 XO clock cycles 12 (CNT_8192): Set count length to 8192 XO clock cycles |
| LOCNTOVERRIDEEN | Enable manual override of CLEAR and RUN 0 (DISABLE): Disable manual override 1 (ENABLE): Enable manual override |
| LOCNTMANCLEAR | Manual Control of LO counter CLEAR 0 (NOCLEAR): Don’t clear LO counter 1 (CLEAR): Clear LO counter |
| LOCNTMANRUN | Manual Control of the LO counter RUN 0 (NORUN): Don’t initiate start/stop LO counter 1 (RUN): Initiate start/stop of LO counter |
| FCALRUNCLKEN | Enable FCAL run pulse counter clock 0 (DISABLE): Don’t enable clock 1 (ENABLE): Enable clock |